 |
| Quantity: | |
|---|---|
FBRG12-100
FOBERRIA
85072000
FBRG12-100 is a FOBERRIA 12V 100Ah lead acid battery listed for UPS, renewable energy storage and other backup applications. Its F14 terminals and 330 × 171mm footprint support installation assessment. Capacity ratings cover several discharge durations.
The listing title calls this an AGM battery, while its category is Deep Cycle Gel Battery. Specify FBRG12-100 in an enquiry and confirm the supplied electrolyte technology. Catalogue placement alone should not determine the final purchase description.
FBRG12-100 specification
Parameter | Condition / detail | Value |
|---|---|---|
Battery designation | — | FBRG12-100 |
Rated voltage | — | 12V |
Discharge capacity at 25°C | 20HR(10.5V) | 100Ah |
Discharge capacity at 25°C | 10HR(10.5V) | 85Ah |
Discharge capacity at 25°C | 1HR(9.6V) | 60Ah |
Enclosure measurements | Length | 330±1mm |
Enclosure measurements | Width | 171±1mm |
Enclosure measurements | Height | 214±1mm |
Enclosure measurements | Total height | 220±1mm |
Approximate battery mass | — | 29.5kg ±5% |
Connection designation | — | F14 |
Resistance when fully charged at 25°C | — | Approx. 4.5mΩ |
20-hour capacity by temperature | 40ºC | 102% |
20-hour capacity by temperature | 25ºC | 100% |
20-hour capacity by temperature | 0ºC | 85% |
20-hour capacity by temperature | -15ºC | 65% |
Retained charge at 25°C | 3month | Remaining Capacity:91% |
Retained charge at 25°C | 6month | Remaining Capacity:82% |
Retained charge at 25°C | 12month | Remaining Capacity:65% |
Reference operating temperature | — | 25ºC±3ºC(77ºF±5ºF) |
Permitted temperature window | Discharge | -15ºC-50ºC(5ºF-122ºF) |
Permitted temperature window | Charge | -10ºC-50ºC(14ºF-122ºF) |
Permitted temperature window | Storage | -20ºC-50ºC(-4ºF-122ºF) |
Standby charge voltage at 25°C | — | 13.6 to 13.8V(Temperature compensation:-18mV/ºC) |
Cycle recharge voltage at 25°C | — | 14.5 to 15V(Temperature compensation:-30mV/ºC) |
Charging current ceiling | — | 30A |
Brief discharge current limit | — | 800A(5sec.) |
Float design reference at 20°C | — | 12years |
Selection note: The title specifies AGM and the category specifies Deep Cycle Gel Battery. The main listing photo is labelled FBR12-100, while the model field and table say FBRG12-100. The image is shown only as the listing illustration; confirm chemistry and actual supplied label.
Solar and wind energy storage are listed uses. Define the expected discharge pattern and charging source before selecting this model for a renewable installation. The 100Ah headline is a 20-hour rating, so a different duty profile needs its own assessment.
The application list includes EPS, UPS, signal systems, emergency lighting and security systems. For backup planning, distinguish short high-current demand from a sustained emergency load. The published one-hour capacity is 60Ah at 25°C to 9.6V.
Telecommunication equipment and portable devices or tools also appear in the listed applications. Equipment builders should compare the nominal 12V supply, connection type and available space with the device specification. Physical fit does not establish electrical compatibility.
Float operation uses 13.6–13.8V at 25°C; cyclic charging uses 14.5–15V. Their temperature-compensation entries differ: −18mV/°C and −30mV/°C respectively. Maximum input current is 30A, so confirm that the intended charger supports the required operating mode.
The overall height is 220 ±1mm, above the 214 ±1mm case height. Length and width are 330 ±1mm and 171 ±1mm. The 29.5kg ±5% weight and F14 terminals should be included in the enclosure and connection review.
Discharge is listed from −15°C to 50°C, while charging is permitted from −10°C to 50°C. Storage is specified from −20°C to 50°C. The retention table gives 82% remaining capacity after six months at 25°C; include inventory age in commissioning planning.
The separate FBR12-100 AGM UPS battery has similar published dimensions and capacity entries. Similar numbers do not settle the FBRG12-100 chemistry question. The VRLA backup battery range helps buyers locate related options without treating them as interchangeable.
An enquiry should pair FBRG12-100 with its intended application, load duration, environmental range and existing charger settings. Use the FOBERRIA contact details to confirm the technology and current product label. The pictured production operation is published with this product listing.
The FBRG12-100 title says AGM, while the category says Deep Cycle Gel Battery. Confirm the supplied chemistry against this exact model before ordering or finalising the equipment documentation.
Solar and wind storage are listed applications for FBRG12-100. Its 100Ah capacity is specified at the 20-hour rate; verify the intended cycling duty and charger compatibility for the project.
FBRG12-100 lists EPS, UPS, emergency lighting, signal and security systems. Determine the required autonomy from the actual emergency load; the table gives 85Ah at 10HR and 60Ah at 1HR under different cutoff conditions.
Maximum charging current is 30A. At 25°C, the specified cyclic charging range is 14.5–15V, while the float range is 13.6–13.8V.
The designation is FBRG12-100, rather than FBR12-100. Both show 100Ah at 20HR and F14 terminals, but the FBRG listing’s technology description needs clarification before substitution.
FBRG12-100 has a 220 ±1mm total height, compared with a 214 ±1mm case height. Connection access also needs review when assessing the full installation.
